Who reloads

Charlie · Post by **Charlie** » Fri Jun 13, 2014 8:10 pm

who all reloads besides me on here? come on i know someone here likes it as well i as i do LOL.

Creeping Death · Post by **Creeping Death** » Fri Jun 13, 2014 8:48 pm

I haven't done it yet, but I've purchased all the equipment and a few die sets. Now I just need some bullets, brass and powder and a manual. I expect to be launching questions left and right once I actually try it.

scat · Post by **scat** » Fri Jun 13, 2014 9:23 pm

I have been reloading for a few years now. Calibers: .223, 25-06, 30-06, 300WM, 44 Magnum, 45-70, 458WM

Creeping Death · Post by **Creeping Death** » Fri Jun 13, 2014 9:26 pm

Dies sets I bought are 257 WBY, 7x57mm, .30 TC (yes, I was dumb enough to buy a .30 TC rifle).

Charlie · Post by **Charlie** » Fri Jun 13, 2014 9:42 pm

I've been reloading for about a year for 30-06 .270 .243 just now getting the hang of it. now looking to explore with my 30-06 and see what it likes.

Wild Bill · Post by **Wild Bill** » Sat Jun 14, 2014 5:32 am

I have been loading for about 30 years now. It is not a cheap hobby but I sure do enjoy working up loads for my rifles. I load 22-250,243,25-06,270,7mm-08,280,7mag,270wsm,300wsm,and a few pistols

Bucky · Post by **Bucky** » Sat Jun 14, 2014 8:12 am

I would like to but don't think i would ever get the hang of it

Charlie · Post by **Charlie** » Sat Jun 14, 2014 11:41 am

Rem30.06 wrote:I would like to but don't think i would ever get the hang of it

it's easy you just have to watch what you are doing and lot double load them i done that few times and caught them before i seated the bullet LOL

MUP · Post by **MUP** » Sat Jun 14, 2014 5:44 pm

I've been reloading for .223, .30 carbine, and some 30-06. Looking to expand to .243, 22-250, and 7mm-08 now.

Deer Assassin · Post by **Deer Assassin** » Tue Jun 17, 2014 1:36 pm

i have reloaded about every thing in the las 11 years

Inkstainz · Post by **Inkstainz** » Tue Jun 17, 2014 7:48 pm

Something I've not gotten the hankering to do yet. I think I learn better hands on then I do reading a book

Sent from my SAMSUNG-SM-G870A using Tapatalk

EastTNHunter · Post by **EastTNHunter** » Wed Jun 18, 2014 11:00 am

I really enjoy the process of handloading, even aside from it's obvious output. It is enjoyable and relaxing to me.

I load for:
.30-30, .30-06, .22-250, .223, .270, .44, 9mm, 40 S&W

sgtwebb1 · Post by **sgtwebb1** » Wed Jun 18, 2014 11:16 am

I currently load .243, .270 .308, but have loaded many others over the past 10 years.

Sent from my SCH-I535 using Tapatalk

Ranger Brother · Post by **Ranger Brother** » Wed Jun 18, 2014 8:39 pm

I roll my own, 300wsm, 280, 38, 357, 44 mag, 45acp, and load for a few friends.

Bucky · Post by **Bucky** » Wed Jun 18, 2014 8:53 pm

I wish i could do this.

Inkstainz · Post by **Inkstainz** » Wed Jun 18, 2014 9:39 pm

Rem30.06 wrote:I wish i could do this.

I too wish that I could

Sent from my SAMSUNG-SM-G870A using Tapatalk

MUP · Post by **MUP** » Thu Jun 19, 2014 5:30 am

All it takes is just getting started guys. Keep your fired brass, pick up some things along the way, set of dies, powder, bullets, and a single stage press, oh, and case trimmer, primers, powder scale, and probably most importantly, a reloading manual. Simple enough.

Oh, and not the least of which is having some good friends who reload to bounce questions off of while you're getting up to speed.

Charlie · Post by **Charlie** » Thu Jun 19, 2014 6:23 pm

MUP wrote:All it takes is just getting started guys. Keep your fired brass, pick up some things along the way, set of dies, powder, bullets, and a single stage press, oh, and case trimmer, primers, powder scale, and probably most importantly, a reloading manual. Simple enough.

Oh, and not the least of which is having some good friends who reload to bounce questions off of while you're getting up to speed.

X2 this is what i done and now i reload for 4 different guns and it's easy as pie. i just got done using my first pound of 4350 the other day. got to stop buy and see if i can find some and pick a few boxes of bullets up as well.

MUP · Post by **MUP** » Thu Jun 19, 2014 6:43 pm

Good luck finding some 4350 now Charlie! Hens teeth!

Charlie · Post by **Charlie** » Fri Jun 20, 2014 3:39 pm

MUP wrote:Good luck finding some 4350 now Charlie! Hens teeth!

yeah i know i been looking for a while now LOL.

Smokyrider · Post by **Smokyrider** » Fri Jun 20, 2014 4:52 pm

I only reload for my .338 WINMAG right now but plan on reloading .308 WIN in the near future.

EastTNHunter · Post by **EastTNHunter** » Sat Jun 21, 2014 5:26 pm

8lb jug of H4350 was $210 at The Outpost Armory the other day. Big Daddy's was selling it for $36/lb the other day, smh. I bought a few pounds of IMR 4350 a year or so back and I think that I have $24/lb in it including shipping. You have to buy it before you need it or else you will have to pay crazy prices

MUP · Post by **MUP** » Sat Jun 21, 2014 6:59 pm

Yea, I did that when I was finding varget there for a while, but now its pretty scarce, locally anyway. I haven't seen it in a while on the rare occasion I get over to SW here lately.

Rockhound · Post by **Rockhound** » Sun Jun 22, 2014 1:50 pm

204, 223, 22-250, 243, 6mm, 260, 270, 7 mm, 7 mm wsm, 30-06, 10 gauge and 12 gauge

Charlie · Post by **Charlie** » Tue Jun 24, 2014 1:09 pm

Rockhound wrote:204, 223, 22-250, 243, 6mm, 260, 270, 7 mm, 7 mm wsm, 30-06, 10 gauge and 12 gauge

Welcome to the site Rockhound glad to see their is a lot of realoders on here LOL. that's good to know that i wasn't alone on here

HuntFishQuest.com

Who reloads

Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads

Re: Who reloads